Fitment & QC
Factory fitment is the product.
The core promise is not a style match. It is a wheel that lands on the hub correctly, clears factory hardware, carries the expected load, and ships with enough documentation for retail and wholesale buyers to trust it.
Fitment & QC
Matched to the factory print — not the internet photo.
Every profile in our catalog is reverse-engineered from OEM tooling data, not scanned off a used wheel. That's the difference between "looks close" and actually torquing down flush, TPMS intact, brakes clearing.
- Reverse-engineered from OE geometryBolt pattern, offset, and hub bore pulled from factory tooling data, not aftermarket guesswork.
- JWL/VIA and SAE J2530 testingIndependent radial, cornering, and impact fatigue testing on profiles where certification applies.
- Hub-centric & TPMS verifiedConfirmed clearance for factory sensors and hub-centric fitment — no hub rings required.
- Finish-matched to OEM paint codeGloss, machined, and gunmetal finishes checked against factory color codes under D65 light.
WHEEL SPEC — CATALOG #TGL-7719
REV. C
- Diameter
- 19in
- Width
- 8.5J
- Bolt Pattern
- 5×114.3PCD
- Offset
- ET38mm
- Hub Bore
- 66.1mm
- Load Rating
- 815kg
- Finish
- GunmetalSAT
- Certification
- JWL·VIAPASS
Each product profile pairs finish photography with dimensional records so a buyer can compare surface, bolt pattern, offset, bore, and load rating before the wheel leaves the dock.